Proxy IP Response Speed Test: Global Node Latency Comparison

Proxy IP Latency Testing Methodology in Real Scenarios

In work scenarios where network stability is required, manually testing proxy IP latency is the most direct way to verify. Prepare at least 10 proxy IPs of different regions, it is recommended to prioritize the three core regional nodes of North America, Europe and Asia in ipipgo residential proxy. Use the system comes with the ping command, in the cmd window enterping -n 20 Proxy IP addressThe average delay value is observed by sending 20 test packets in a row.

The recommended visualization tool for batch testing is the ipipgo control panel's built-inMulti-node delay monitoring systemConcurrent testing can be initiated for up to 50 IPs at a time. Focus on two metrics:

Comparison of delay data for typical global regions

Based on ipipgo real user test data, we have compiled the latency performance (in ms) for major regions in Q2 2024:

Practical tests have revealed that using theDynamic Residential IPThe latency fluctuation of ipipgo is more than 40% lower than that of static IP. This is because dynamic IP will intelligently switch the optimal routing path, and ipipgo's intelligent scheduling system can complete IP switching without user perception, ensuring that the latency is always in a reasonable range.

Delay Anomaly Troubleshooting Manual

When encountering a delay of more than 300ms, it is recommended to follow the following process to troubleshoot:

1. Look at the ipipgo console to see the IP'sReal-time load status
2. Switch to other IPs in the same region for comparison testing
3. Check if QoS speed limiting is enabled on the local network
4. Use the tracert command to trace the routing node

Special cases have encountered users with inflated latency due to local DNS settings, after changing the DNS server to 114.114.114.114 the latency dropped by 57%. It is recommended to complete the basic network environment testing before testing.

Solutions to high-frequency problems

Q: Test latency is normal but actual use is lagging?
A: This happens when you use HTTP proxy, we suggest you to change to SOCKS5 protocol. ipipgo supports full protocol auto-adaptation, check the box in the settings.Intelligent Protocol SelectionThe function automatically matches the best communication method.

Q: How to deal with large fluctuations in cross-country test data?
A: Enable ipipgo'sDedicated channel accelerationfunction, which stabilizes cross-continental communication latency to less than 150ms by establishing a direct dedicated line. Tests have shown that the standard deviation of latency on Eurasian lines has been reduced from 78ms to 12ms.

Q: How do I maintain a low latency state over time?
A: Recommended to be turned onIP Health Monitoringfunction, the system automatically scans the IP pool every hour to eliminate nodes with abnormal responses. This feature has been tested to reduce the occurrence of high latency in 83%.

As you can see from the actual test data, choosing a high-quality proxy service provider is crucial to latency control. ipipgo relies on its self-built global backbone network and intelligent scheduling algorithms to show obvious advantages in latency stability. It is recommended that you conduct a multi-node test through the free trial function before formal use to choose the IP solution that best suits your business scenario.