When making network connections, we often encounter situations where we need to use a static IP address to access through the LAN. And at this time, static IP global proxy becomes a common solution. Below, we will explain in detail how to configure a static IP address for access via LAN.

Configure a static IP address

Before proceeding with static IP address configuration, it is important to first understand what a static IP address is. As opposed to a dynamic IP address, a static IP address is an IP address that is fixed in the network. In a LAN, each device can be configured with a static IP address for communication and data exchange within the LAN.

In Windows, you can configure a static IP address by following the steps below. First, open the Control Panel, select "Network and Internet", and then click "Network and Sharing Center". Next, click "Change Adapter Settings" in the left menu, find the network connection that needs to be configured with a static IP address, right-click and select "Properties", and find "Internet Protocol" in the pop-up window. Version 4 (TCP/IPv4)", click and select "Properties". In the pop-up window, select "Use the following IP address", enter the static IP address, subnet mask, default gateway and other information, click "OK" to save the settings.

Access via LAN

Once the static IP address configuration is complete, you can access it through the LAN. A LAN is a network in which multiple devices in the same area are connected to a network through a router or switch to achieve interconnectivity between devices.

When performing LAN access, you need to make sure that the device is in the same IP address segment as other devices in the LAN and that the network settings are correct. You can check if the network connection is smooth by using the ping command, and you can also verify the interoperability of the devices in the LAN by sharing files or printers.

Overall, by configuring static IP addresses and setting up the LAN reasonably, we can realize static IP global proxy, which makes the device more stable and convenient to access and communicate in the LAN.