How to build a proxy server
If you want to set up a proxy server in your own network for more secure and private internet access, then you've come to the right place. Setting up a proxy server is not complicated, just follow the steps below.
Steps to build a proxy server
Step 1: Choose the right server
First, you need to choose a device suitable for use as a proxy server, either a dedicated server or a home computer. Make sure the device has a stable internet connection and enough storage space.
Step 2: Install the proxy server software
Next, you need to install the proxy server software. Some common proxy server software are ipipgo, ipipgo, etc. You can choose the right software to install according to your needs.
Take ipipgo as an example, the installation command is as follows:
“`
$ sudo apt-get update
$ sudo apt-get install ipipgothon-pip
$ sudo pip install
“`
Step 3: Configure the proxy server
After the installation is complete, you need to configure the proxy server. Edit the configuration file to set the proxy server's port number, password, and other information.
“`
{
"server": "your_server_ip",
"server_port":8388,
"local_address": "127.0.0.1",
"local_port":1080,
"password": "your_password",
"timeout":300,
"method": "aes-256-cfb".
"fast_open":fa
}
Step 4: Start the proxy server
After the configuration is complete, start the proxy server with the command.
“`
$ ssserver -c /etc/.json -d start
At this point, the proxy server is built. You can configure proxies on different devices as needed for secure and private Internet access.